Here is the step-by-step guide illustration for opening a car bonnet, with labeled visuals for each stage to make it easy to follow along.

Step 1: Park Your Car and Turn It Off

1. Park the car on a flat surface.
2. Turn off the engine and remove the key.
3. Engage the parking brake to prevent the car from moving.

This is important for safety.

Step 2: Find the Bonnet Release Lever

1. Look inside the car, usually on the driver’s side, near the bottom left of the dashboard.
2. Look for a small lever or button with a bonnet icon on it. In most cars, it will be a picture of an open bonnet.

When you find it, pull or press the lever. This action unlocks the bonnet, and you may hear a small “click” sound.

Step 3: Locate the Bonnet Catch (Outside the Car)

1. Go to the front of the car and look between the bonnet and the car’s grille (where the bonnet meets the front of the car).
2. You will find a small safety latch or catch. You need to push or lift it to fully release the bonnet.

This safety latch keeps the bonnet from flying open while you’re driving.

Step 4: Lift the Bonnet

1. Hold the bonnet from the center or one of the sides.
2. Lift it carefully and watch your fingers. Most bonnets are heavy, so be cautious.

Some cars have a support rod that you need to lift and place into a designated hole to keep the bonnet up. Other cars have a hydraulic system that holds the bonnet up automatically.

Step 5: Secure the Bonnet

If your bonnet has a support rod, make sure it’s securely in place before letting go. If it has a hydraulic system, it should stay up on its own once you open it fully.